Loctite 222 Quality Purple Low Strength Threadlocker
from Shirley(hengying@cnhybond.com 0086-18927302778 Skype:hengying11)
1. Color: purple color, anaerobic type, anaerobic glue
2. General type, thyrotrophic viscosity, and can be dismantled with hand tool
3. Use for sealing the M2-M12 screw thread lock to prevent screw thread from corrosion
4. Typical function: to lock the general type screw thread
5. Product introduction
222 is a kind of one-component, thyrotrophic viscosity, general type, anaerobic type screw thread lock sealant. This product is applied to two close-fit metal surfaces and solidifies when isolating with air, and can be dismantled with hand tool.
6. Product application
Avoid looseness and leakage of the screw thread fastener. Use for sealing the M2-M12 screw thread lock to prevent screw thread from corrosion. Typical function: to lock nuts
7. Product character
Typical value
|
scope
|
Basic chemical component
|
methyl acrylic acid ester
|
color
|
purple
|
viscosity @25°C, mPa.s
|
1200-2000
|
proportion
|
1.05 1.00-1.10
|
flash point (℃)
|
>93
|
maximum gap filling（mm）
|
0.13
|
fixed time（min）
|
15 10-20
|
performance after solidification
| |
complete solidification time under room temperature （hrs）
|
24
|
destabilizing moment（N· m）
|
7 8-17
|
average dismantling moment（N· m）
|
4
|
operating temperature（℃）
|
-60～150
|
Aging under the following conditions and tested at temperature of 22
solvent
|
temperature (℃ )
|
Initial intensity remaining rate (%)
|
100 500 1000(hr)
| ||
engine oil
|
125
|
100 100 100
|
leaded gasoline
|
22
|
100 100 100
|
water/glycol （50%/50%）
|
87
|
100 100 100
|
ethanol
|
22
|
100 100 95
|
acetone
|
22
|
100 100 85
|
8. Instructions
(1). The applied side should be washed clean, dry and oil-free, which choose 755 abluent to have the best effect.
(2). Apply enough glue on the bolt to fill up the whole thread engagement; this product will have optimum result on the thin sub of below 0.05mm.
(3). As to the king size screw thread, the large clearance will affect the speed of solidification and intensity. This product can alleviate the friction caused by assemblage (torsional moment and tension ratio), which should be fixed in advance when tight up the screw thread to the critical value.
9. Safety notice
This product contains crylic acid and methyl acrylic acid hydroxide propyl propionate, which is irritative to skin and eyes. If the liquid gets to the skin should rinse with water at once; if eyes, should rinse with water and consult the doctor.
10. Packaging 50ml. 250ml
11. Storage condition
Shelf life (in sealed container) can be up to 18 months in a cool and dry place with temperature ranging from 15 to 28.
Shelf life (in sealed container) can be up to 18 months in a cool and dry place with temperature ranging from 15 to 28.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties. Material removed from containers may be contaminated during in the course of
using. Do not return product to the original container. Heng ying Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact us.
We have new company pages on facebook, google, linkedin, and please follow us, thank you.
https://plus.google.com/u/0/b/117466620353553764866/117466620353553764866/admin/?tab=XX#117466620353553764866/posts?tab=XX
No comments:
Post a Comment